A, WH-WCS-90WH touchscreen salt spray chamber Features: 1. integrally molded at high temperature welding, corrosion-resistant, easy to clean, no leakage phenomenon. 2. Using a spray tower system, and is equipped with a salt solution filtration system, no crystal nozzle, spray evenly distributed free to adjust the amount of the settlement. 3. cover the use of transparent materials can be clearly seen inside the test article and spray condition. 4. The use of a water seal between the lid and the box structure, no salt overflow. 5. strength line control panel and other parts are fixed in position for easy inspection and maintenance, the use of open-style side door lock is not only beautiful, but also easy to maintain. WH-WCS-90WH touchscreen salt spray chamber parameters: 1, Model: WH-WCS-90WH 2, test tank: inner box size -900 * 600 * 500 (L * W * H) mm external dimensions - according to customer order System 3, the maximum power consumption: AC 220V single phase 3KW 50 / 60HZ one, WH-WCS-90WH touchscreen salt spray chamber performance indicators: 1, temperature range (depending on the CNS JIS ASTM GB2423.19 specifications, can be set thermostats Control) (A) salt spray test: NSS, ACSS (1) Laboratory: 35 ℃ ± 1 ℃ (2) saturated air barrel: 47 ℃ ± 1 ℃ (B) corrosion test: CASS ((copper acetate)) ( 1) Laboratory: 50 ℃ ± 1 ℃ (2) saturated air barrel: 63 ℃ ± 1 ℃ 2, fog settlement; 1 ~ 2ml / 80cm2.h 3, spray: Spray can be set to continuous and intermittent Spray 4, the air pressure of 1kg / cm2 5 ,. Test Timing: 1 ~ 9999 (S, M, H) can be set adjustable two, WH-WCS-90WH touchscreen salt spray chamber works: (1) using the Bernoulli then brine draw special atomization principle, a uniform degree of atomization, no blockage phenomenon of the crystals to ensure the continuous testing standards, it has access to the compressed air by way of the nozzle in the bubble column is wet. (2) Nozzle: The nozzle is made of special glass, the use of time of up to 5000H or more, adjust the size and angle of the spray volume of discharge, the etching solution and air atomized into mist corrosion, tank heater to keep the box temperature. (3) the spray volume 1 ~ 2ml / h adjustable (ml / 80cm2 / h standard requires 16 hours to test the amount of averaging). Three, WH-WCS-90WH touchscreen salt spray test run control system: 1, imported high-precision 6.5-inch Intelligent LCD touch screen controller, temperature, time, alarm, demister, spray, keyboard lock and other functions integrated control. Screen display beautiful clear, beautiful, user-friendly design with the platinum material temperature sensors, the overall temperature error ± 0.1 ℃. 2, the use of steam heating, heating speed reducing standby time, when the temperature reaches the automatic switching constant temperature, temperature accuracy, low power consumption, pure titanium heat pipes, acid corrosion, long service life. 3. The all-digital circuit design, temperature control accuracy, using high-quality imported electrical materials, reasonable layout design, long life, with Itself off, self-testing and other advanced features accordingly. 4, the working dynamic display interface, and a buzzer alarm working conditions. 5. With automatic / manual water features, low water level can automatically replenish the water level does not interrupt the test. 6, with the outage time and memory function, so that the original time after the call to continue the work of the remaining time to complete the test, with a double over-temperature protection, water shortage warning, to ensure safe use. 7, demisting systems: remove salt spray test chamber at shutdown to prevent corrosion damage laboratory gas outflow other precision instruments. Four, WH-WCS-90WH touchscreen salt spray test standard: meet the GB / T2423.17; GB / T10125-1997; GB10587; GB6460; GB1771; ASTM-B117; GJB150; DIN50021-75; ISO3768,3769,3770; CNS 3627,3885,4159,7669,8866; JISD-0201, H-8502, H-8610, K-5400, Z-2371 standards.